Swing Check Valves (PVC)
Swing Check Valves are mechanical valves that permit water to flow in only one direction, preventing process flow from reversing. They are classified as one-way directional valves. Fluid flow in the desired direction opens the valve, while backflow forces the valve closed.
These install near your skimmer or filter, so if the pump is turned off, it will not back-siphon and dry up.
Also used to help with priming an external pump. Used on the intake to keep water in the pipe.
1-in. Swing Check Valve SLIP
1-1/4-in. Swing Check Valve SLIP
1-1/2-in. Swing Check Valve SLIP
1/2-in. Swing Check Valve THD.
1-1/2-in. Swing Check Valve THD.
3/4-in. Swing Check Valve THD.
1-in. Swing Check Valve THD.
1-1/4-in. Swing Check Valve THD.
2-in. Swing Check Valve SLIP
are quarter-turn, straight through flow valves that have a round closure element with matching rounded seats that permit uniform sealing stress.
Ball valves are used in situations where tight...(click on product image for more details)
allow you to tightly close off the water lines of the connected piping to allow for maintenance on joined mechanisms such as pumps or filters without shutting down your pond.
Gate valves...(click on product image for more details)
UNION, 1-1/2” MPT X 1-1/2” SOC.UNION, 1-1/2” FPT X 1-1/2” SOC.UNION, 1-1/2” MPT X 2” SOC.UNION, 2” MPT X 2” SOC
In general, True Union Swing Check Valves
offer many advantages when contrasted with other valve types. They provide superior ease of operation and can maintain and regulate high volume, high pressure and...(click on product image for more details)
These 3-Way Valves
can be used in your plumbing wherever you may require to divert the flow of water. This is mainly used in the case of maintenance of your filtration or pump equipment.
The...(click on product image for more details)